Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP500 Series - Single Channel Transmitters

500 Series - Single Channel Transmitters

Features:

Low Cost per Channel
4-20 mA Output
Transducer Fault Detection
Buffered Transducer Output On Front BNC
High and Low-Pass Filters Available
Small Size and DIN Rail Mount
Approved
CSA & UL Approved
Class I Division II

The CMCP500 series transmitters are designed for a multitude of sensors. Standard models are available for all vibration transducers, temperature, process, and other parameters.

Each monitor provides power to the associated transducer, processes the signal to determine the amplitude, and outputs a 4-20mA signal. The 4-20mA proportional output is designed for use in datalogging or process control in the plant's PLC, DCS or HMI.

Available Models:

CMCP525 Vibration Acceleration Transmitter

CMCP530 Vibration Velocity Transmitter

CMCP535 Integrated Vibration Displacement Transmitter

CMCP540 Vibration Displacement Transmitter

CMCP545 Position Transmitter

CMCP547 Differential Expansion Transmitter

CMCP548 Case Expansion Transmitter

CMCP549 Valve Position Transmitter

CMCP560 Isolated RTD Temperature Transmitter

CMCP565 Isolated Thermocouple Transmitter

CMCP570 Solid State Temperature Transmitter

CMCP575 Speed Transmitter

CMCP580 Process Variable Transmitter

CMCP585 Eccentricity Transmitter

CMCP590 Acceleration Enveloping Transmitter

CMCP595 Accessory Module

Pictures (Thumbnails):

Dimensions:

Buffered Output - A BNC connector mounted on the front of the unit provides access to the buffered transducer output signal. This includes both the unfiltered vibration signal, and the DC bias voltage. Portable test equipment or analyzers like SKF-CM's Microlog can be connected to this output without disturbing other system outputs.
Fault Detection - On board fault detection circuitry continuously monitors the transducer for normal operation. If a fault occurs, the output current is reduced to 2 mA to indicate the fault to the readout system. A red LED on the front of the unit is turned on to provide a local indication of the fault.

Filters - or vibration monitoring applications that require monitoring specific frequency bands, optional high-pass and low-pass filters can be specified. (Only available on vibration models)

Displays and Assemblies - Various display options, NEMA and explosion-proof enclosures, and assembled multi-channel systems are available.