Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP575 Speed Transmitter

Features:

Low Speed Response
Smart Touch™ Calibration
0.031 Hz to 38 KHz Response
±0.1% Accuracy
Selectable Output (mA or VDC)
Low Cost
Small Size
DIN Rail Mount
Universal Input (Including Eddy Probe)

The CMCP575 Speed Transmitters are compatible with proximity probe or Hall effect inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the signal, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-1,000 RPM. Combining transmitters with an existing PLC or DCS system results in a high density, low cost monitoring system.

Displays and Assemblies:

Various display options, NEMA and explosion-proof enclosures, and assembled multi-channel systems are available. Consult your sales representative.

Mounting:

32 mm (G style) or 35 mm (T style) DIN Rail.

Ordering Example:

To order a standard speed transmitter that accepts input from a proximity probe system with a Full Scale of 1,000 RPM and 60 events per revolution, specify Part Number: CMCP575-01-60-01.

NOTES:

1. The Full Scale option specified at order entry is used by the factory for initial calibration. However, several other ranges can be jumper selected in the field.

2. Transducer and Full Scale options not listed are available. Contact your sales representative.

Specifications:

Input Signals
Voltage (Amplitude):	10 mV-100 Vrms (0-5kHz); 50 mV to 50 Vrms (1 kHz to 38 kHz)
Contact:	Dry, 2 mA @ 24 VAC rating
Frequency Range:	0-0.031 Hz to 0-38 kHz full scale
Output Signals
Type:	4-20 mA DC; 0-20 mA DC; 0-10 mA DC; 0-1 mA DC; 1-5 VDC; 0-5 VDC; 0-10 VDC
Output Loop Drive Capability:
V Supply:	15 to 42 VDC	I out	4-20 mA or 0-20 mA
		V supply	15	24	36	42
		R(ohms)	500	950	1550	1850
Performance
Calibrated Accuracy:	±0.1%
Independent Linearity:	±0.025% max
Repeatability:	±0.005% max., ±0.002% typ.
Zero TC:	±0.005% of span max/°C
Span TC:	±0.005% of span max/°C
Load Effect:	±0.005% zero to full load
Output Ripple:	10 mV P/P maximum
Response Time:	3 milliseconds (10 to 90% step response)
Bandwidth:	(-3 db): 120 Hz output response
Temperature Range:	-25° to 185°F (-31° to 85°C) operating; -40° to 200°F (-40° to 93°C) storage
Power Supply Effect:	±0.005% of span, max.
Isolation:	Input/output/case: 1000 VDC or 600 VAC
Note: All accuracies are given as a % of span.
Power
15 to 42 VDC:	28 mA typical; 33 mA maximum Reverse polarity and transient protection included
Mechanical
Electrical Classification:	General purpose
Connection:	Screw, compression type, accepts up to 14 AWG
Controls:	Input SPAN and ZERO push buttons, Input Hsyteresis potentiometer, Output Span and Zero potentiometers
Mounting:	DIN rail
Weight:	4 oz. (115 grams)
Housing:	Rugged Krilen for protection against corrosion, moisture and dust

Ordering Information:

CMCP575	-XX	-XXX	-XX	Speed Transmitter
	-01			Output From Eddy Current Probe System
	-02			Hall Effect Sensor (Proximity Switch)
		-01		1 Event per Shaft Revolution
		-60		60 Event per Shaft Revolution
		-120		120 Event per Shaft Revolution
		-Specify		Specify Exact Number of Events
			-01	0-1000 RPM
			-02	0-2000 RPM
			-05	0-5000 RPM