CMCP595 Accessory Module

• Low Cost
• Provides Terminations
• Finished Complete Look
• BNC Output for Analyzers
• Selectable Resistance Buffers
• CCD for Accelerometers
• Handles Most Sensors
• Up to 4 Buffered Outputs
• Selectable Bias Voltage Block
• Approved

Description:

The CMCP595 Accessory Module is designed to handle several interfaces including, Key Phasor, Accelerometers, 3-Wire Sensors and as a 4-Way Passive Buffer for vibration signals.  The CMCP595 provides termination point and power routing in a matching CMCP500 Series enclosure.  The unit provides a BNC Connector for Portable Analyzers.

1. Key Phasor Module (Eddy Probe -24 VDC)
2. Key Phasor Module (Hall, Inductive, Proximity +24 VDC)
3. Accelerometer Module (Accelerometers using Constant Current Diode)
4. 3-Wire Sensor
5. 4-Way Passive Buffer Module

The CMCP595 Module is very versatile and can be used for many more functions as the need arises.  Passive Buffers can be individually selected as 0 Ohms, 100 Ohms, 1k Ohm or 10k Ohms.  A "Bias Blocker Jumper" is provided to remove Bias voltages from Signals if required.

Caution: Be sure Constant Current Diode (CCD) is in the circuit when powering Accelerometers.  Damages to the Accelerometer will occur with direct power.

Ordering Information: