Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP140/150 NEMA 4 and 4X
Proximity Probe Driver Enclosures

NEMA 4 and 4X Din Rail Enclosures are provided by STI for housing Proximity Probe Drivers. These enclosures are not limited to drivers, the enclosures may be used to mount a DIN rail mounted devices such as a transmitter. STI should be contacted for any non standard configuration.

The enclosure covers have a continuous hinge on the long side of the unit for convenience, and are secured to the enclosure with clamps. The enclosures are available in NEMA 4 painted steel or NEMA 4X stainless steel to suit most applications. All enclosures are provided with an oil resistant gasket and stainless steel clamps for easy screwdriver access.

All of the enclosures can be air purged with plant air to meet the specific application needs. A simple purge fitting for connection to plant air is available as a standard option. Hazardous area air purge systems can be supplied by STI to satisfy unique applications.

NEMA Enclosures 4 4X Enclosure

NEMA 4 Painted Steel Enclosures
The interior and exterior surfaces of this box are coated with ANSI 61 powder. This enclosure is constructed from 14 gauge mild steel and is designed for use in areas which may be very wet, or regularly hosed down. Suitable for both indoor and outdoor installations.

Ordering Information:

CMCP140	-XX	NEMA 4 Enclosures
	-04	4-Drivers
	-06	6-Drivers
	-08	8-Drivers
	-10	10-Drivers

NEMA 4X Stainless Steel Enclosures
Constructed from 14 gauge 304 stainless steel rather than a mild steel; these enclosures are designed for the same use as the NEMA 4 enclosures with the added ability to withstand corrosive environments.

Ordering Information:

CMCP150	-XX	NEMA 4X Enclosures
	-04	4-Drivers
	-06	6-Drivers
	-08	8-Drivers
	-10	10-Drivers

NEMA 4 and NEMA 4X Size Chart:

CMCP	140	-XX	NEMA 4 Enclosure for DIN Rail Drivers
		-04	10" H x 8" W x 6" D (254mm x 203.2mm x 152.4mm)
		-06	12" H x 10" W x 6" D (304.8mm x 254mm x 152.4mm)
		-08	14" H x 12" W x 6" D (355.6mm x 304.8mm x 152.4mm)
		-10	16" H x 14" W x 6" D (406.4mm x 355.6mm x 152.4mm)

CMCP	150	-XX	NEMA 4X SS Enclosure for DIN Rail Drivers
		-04	10" H x 8" W x 6" D (254mm x 203.2mm x 152.4mm)
		-06	12" H x 10" W x 6" D (304.8mm x 254mm x 152.4mm)
		-08	14" H x 12" W x 6" D (355.6mm x 304.8mm x 152.4mm)
		-10	16" H x 14" W x 6" D (406.4mm x 355.6mm x 152.4mm)

Accessories:

CMCP261 Liquid Tight Strain Relief Connectors
The CMCP261 Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into BNC Junction Boxes.

CMCP140/150 NEMA 4 and 4X Proximity Probe Driver Enclosures

CMCP140/150 NEMA 4 and 4X
Proximity Probe Driver Enclosures