Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP261 Liquid Tight Strain Relief Connectors

Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into BNC Junction Boxes. Long cable runs or cables other than the actual extension cable should be installed in conduit. Connectors are constructed of Polyamide and provide both environmental sealing and strain relief. The connectors are temperature rated to -40° to 212° F (-60° to 100° C). The connectors have a pressure rating of up to 150 PSIG.

Specifications:

Part Number	Cable Range	Thread	Clearance Hole (A)	Body Length (B)	Thread Length (C)	Wrenching Flats (D)
CMCP261-01	0.059" to 0.12" (1.5mm to 5mm)	PG 7	0.49" (12.5mm)	1.26" (32mm)	0.32" (8mm)	1 19/32" (15mm)
CMCP261-02	0.1" to 0.31" (2.5mm to 8mm)	PG 9	0.60" (15.2mm)	1.38" (35mm)	0.32" (8mm)	1 3/4" (19mm)
CMCP261-03	0.2" to 0.47" (5mm to 12mm)	PG 13.5	0.80" (20.3mm)	1.54" (39mm)	0.355" (9mm)	1 61/64" (24mm)
CMCP261-04	0.275" to 0.55" (7mm to 14mm)	PG 16	0.88" (22.3mm)	1.7" (43mm)	0.39" (10mm)	1 5/64" (27mm)
CMCP261-05	0.35" to 0.70" (9mm to 18mm)	PG 21	1.12" (28.4mm)	1.99" (50mm)	0.43" (11mm)	1 5/16" (33mm)
CMCP261-06	0.55" to 0.984" (14mm to 25mm)	PG 29	1.47" (37.3mm)	2.08" (53mm)	0.43" (11mm)	1 21/32" (42mm)

Liquid Tight Strain Relief Connectors

Ordering Information:

CMCP261	-XX	Liquid Tight Connectors
		Min. OD	Max. OD
	-01	0.059" (1.5mm)	0.12" (5mm)
	-02	0.1" (2.5mm)	0.31" (8mm)
	-03	0.2" (5mm)	0.47" (12mm)
	-04	0.275" (7mm)	0.55" (14mm)
	-05	0.35" (9mm)	0.70" (18mm)
	-06	0.55"(14mm)	0.984" (25mm)