CMCP603H High Temperature 3-Pin Accelerometer Extension Cable

• 3 Pin MIL Spec Connector
• Shielded, Twisted, 20 AWG
• Teflon® Cable (200° C)
• Water Tight Connector Backshell

The CMCP603H extension cables are designed to work with all Accelerometers using a MIL Spec 5015 connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal "0" ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection.

The CMCP603H cables are available in three standard lengths of 16", 32" and 64". Any length desired may be specified and ordered as an option. The cable connectors are rated to 125° C (257° F) and the Teflon® cable wire is rated to 200° C (392° F). The cable is well suited to handle temperatures associated with installation near steam piping, manifolds, etc. The wire is 0.24" in diameter.

-60X

Specify Sensor Connection:

-602

2 Pin MIL 5015 Cable

-603

3 Pin MIL 5015 Cable for Dual Parameter Accelerometers

-604

4 Pin Mini-MIL Cable for CMCP1300 Triax

-X

Specify Cable Type:

-L

Standard

-H

High Temperature

-XX

Specify Cable Length:

-16

16 Foot Cable (5 Meter)

-32

32 Foot Cable (10 Meter)

-64

64 Foot Cable (20 Meter)

-XX

Specify Instrument End Connections:

-00

Blunt Cut (Bare)

-01

Female BNC Connector (Not Available with CMCP604 Triax Cable)