Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP5304 Four Channel General Machinery Monitor

CMCP5304 General Machinery Monitor (4 Channels)

Features:

Two Levels of Alarm with Relays
True "OK" Circuitry with Relay
Adjustable Time Delays
Trip Multiply
4-20 mA Output
Buffered Transducer Output
Reset Button
Bright LED Digital Readout
Approved

The CMCP5304 is a four channel Vibration Monitor that has been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc. The CMCP5304 accepts inputs from any industry standard 100 mV/g accelerometer, conditions the input signals to velocity and provides a digital display and alarm status indication.

Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The CMCP5304 alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution.

The system is a pre-wired turn-key package with panduit, power supply, bright LED display, channel selector switch and reset button. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. The CMCP5304 is available in either an English or Metric configuration. The standard housing is polyester powder coated steel; rated NEMA 12. An optional Stainless Steel enclosure is rated NEMA 4X.

Specifications:

Electrical
Power:	Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response:	(-3 dB) 2 Hz to 20 kHz
Buffered Output:	BNC Connector 0-20 kHz
Accuracy:	5.0% of Full Scale Range
Output:	4-20 mA proportional to the full scale range Relay output for Alert and Danger alarms
Maximum Load:	600 Ohms Resistive per channel
Case:	Isolated
Environmental
Operating Temp.:	-20°C to +80°C (-4°F to +176°F)
Storage Temp.:	-55°C to +125°C (-67°F to +257°F)
Relative Humidity:	0 - 95% Non-Condensing
Approvals:	NEMA 12, EEMAC, UL508, CSA Type 4, VDE IP66, IEC 529, IP66
Physical
Dimensions:	200 mm H x 400 mm W x 150 mm D (7.87" H x 15.75" W x 5.90" D)
Weight:	6.80 Kg (15 lbs)

Ordering Information:

	Model	Enclosure	Display	Description
CMCP5304	-X	-XX	-XX	4 Channel Complete Monitoring System
	-E			English 0-1.0 in/sec
	-M			Metric 0-25.4 mm/sec
		-FG		Fiberglass Enclosure (NEMA 4X)
		-PS		Painted Steel Enclosure (NEMA 4)
		-SS		NEMA 4X Stainless Steel Enclosure
			-N	No Displays
			-I	Independent LED Display
			-C	Common LED Displays (Switchable)