Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com

Tel 281.334.0766
Toll Free 888.777.7213
Fax 281.334.4255

Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

CMCP-TACH3 Programmable Tachometer

CMCP-Tach3 Programable Tachometer

Features:

5-999,999 RPM Range
1 or Multiple pulses per revolution
4-20 mA Output
Alarm Output
0.56" H, Seven Segment LED
High & Low RPM Recall
Optional Eddy Current Probe Input

The CMCP-TACH3 is front panel programmable for single or multiple pulses per revolution and scaling. It may be used as Tachometer, Rate-meter, Counter, or a Totalizer. The tachometer also offers Rate Of Acceleration. The CMCP-TACH3 offers a fixed or floating decimal point and can be supplied with Remote Optical, Infrared, Laser, Proximity, and Magnetic Sensors. It is directly compatible with a TTL input and a 200mV to 50 VAC signal.

The TACH3 has front panel programmable set points, analog voltage and current, TTL and RS232 outputs. The TACH3 can be modified to accept a -24 Vdc Eddy Current Probe input. The TACH3 offers more standard features than any other tachometer available.

STI will integrate the CMCP-TACH3 tachometer into NEMA4, NEMA4X, or Explosion Proof enclosures. Contact your sales representative for details.

Specifications:

Display:	0.56" H, Seven Segment Red LED
Display Update:	0.5 Second above 120 RPM
Cutout Size:	1.74" X 3.58" (44mm X 91mm)
Programmable:	Yes
Range:	5 - 999,999 RPM
Size:	1/8 DIN X 7"
Accuracy:	0.001%
Power:	100-240 VAC Power Input
Pulse per Revolution:	1 or Multiple
Alarms:	Two Alarms, Programmable
Alarm Contacts:	Form C relay contacts rated 1A at 115 Vac
Analog Outputs:	Simultaneous 4-20mA & 0-5 Vdc
Max RPM & Min RPM Recall:	Yes
Standard Inputs:	Magnetic, Proximity, Optical, Laser and Infrared
Eddy Probe Input:	Optional
CMCP XP Housing Option:	Yes

Ordering Information:

CMCP-TACH3	-XXX	-XX	-XX	Programmable Panel Tachometer
	-AC			100-240 VAC Power Input
	-DC			24 VDC Power Input
		-00		Standard Inputs
		-EP		Eddy Current Probe Input
			-00	No Programming Cable
			-01	With USB Programming Cable and Software