April 2011 Newsletter

CMCP
April 2011

"Simply the Lowest Cost Approach to Machine Protection"

Quick Links

STI Products Made in USA

STI Homepage

STI Ecommerce Store

STI Application Notes

CMCP200 Data Sheet

CMCP312 Data Sheet

CMCP797 Data Sheet

Custom Products:

Have an idea or need something special? That's what our Custom Products Group in Houston specializes in! Let us know your needs and we will get you a quotation ASAP. Contact Mike Howardor Mark Tomlin. Or just give us a call (281) 334-0766.

NEW! CMCP312 Din Rail BNC Switch:

STI is pleased to announce the NEW! CMCP312 Din Rail Mounted, 12 Channel BNC Switch.

The CMCP312 provides a switchable BNC output for up to 12 Accelerometers providing easy access for connecting data collectors and analyzers. The CMCP312's small size allows it to be mounted almost anywhere where convenience dictates. The CMCP312 mounts on standard 35 mm DIN rail and accelerometers are easily attached using the provided screw terminals. The CMCP312 is for interior mounting, if mounted outdoors a suitable enclosure should be provided.

$225.00 Introductory Price!

Specifications:

Mounting:	Din Rail (35mm)
Size:	2.07" wide x 3.89" high x 3.0" deep (52.5mm x 98.8mm x 118.11mm)
Terminals:	Screw Type Terminals w/Pressure Plate
Wire Size:	22-14 AWG (smaller wires use ferrules)
Flammability:	Enclosure UL94 V-O
Material:	Glass filled Polycarbonate
Color:	Light Gray
Input:	Up to 12 Accelerometers
Output:	BNC

CMCP200 Series Accelerometer Magnetic Mounting Pads:

At several customers request STI has expanded it's CMCP200 Series Mounting Pad Line by adding Magnetic Versions using 416 Stainless Steel. The magnetic versions are used for Portable Data Collectors and Analyzers using Magnet Mounted Accelerometers. 416 Stainless Steel was chosen for it's corrosion resistance and magnetic attraction properties.

New Low Price on all Mounting Pads! $7.00 each

CMCP200 -XXXX Accelerometer Mounting Pads

-01 1/4" Thick Non-Magnetic 316SS,1/4"x28 UNF Hole

-02 3/8" Thick Non-Magnetic 316SS,1/4"x28 UNF Hole

01M 1/4" Thick Magnetic 416SS,1/4"x28 UNF Hole NEW!

02M 3/8" Thick Magnetic 416SS,1/4"x28 UNF Hole NEW!

01MP 1/4" Thick Magnetic 416SS (No Tapped Hole) NEW!

02MP 3/8" Thick Magnetic 416SS (No Tapped Hole) NEW!

CMCP797 Quad Buffer Module: NEW!

When connecting multiple devices to a common vibration sensor such as accelerometers, velocity sensors and proximity probes a CMCP797 Quad Buffer Module should be used. This active (Op-Amp) type buffer prevents problems on one device from interfering with the other connected devices. This is especially important when sensors wired to a protection system need to be routed to a condition monitoring, data collector/analyzer or data acquisition system. The CMCP797 Quad Output Buffer Module accepts a single input and provides four (4) active buffered outputs on screw terminals and a BNC front panel connector. The CMCP797 can be selected to power accelerometers with an onboard CCD. The CMCP797 is DIN Rail mounted and is powered by +24 VDC. CMCP797 Connection and Setup Drawing (PDF).

We are here to help with your application! If you have any questions or comments please contact us immediately by phone or email, Frank at fhoward@stiweb.com or Matt at matthoward@stiweb.com .

Best Regards

Frank Howard

President

Office: 281.334.0766 x232

Cell: 281.844.2569

FAX: 281.334.4255
fhoward@stiweb.com

www.stiweb.com

www.stiwebstore.com