STI Vibration Monitoring, Inc. Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com
Tel 281.334.0766   
Toll Free 888.777.7213   
Fax 281.334.4255   
Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

Vibration Calculator

Follow us on FacebookFollow us on TwitterSTI Vibration Monitoring YouTube

CMCP423VTA Series Compact Vibration Switch

Field Application Note: Differential Expansion TSI

CMCP423TVA Compact Vibration Switch

   Features:

  • Low Cost, Compact Vibration Switch
  • 4-20mA and Relay Output
  • Vibration Velocity RMS
  • 1.0 or 2.0 Ranges (25.4 or 50.8mm/sec)
  • 10 to 1kHz Frequency Response
  • Adjustable Alarm Level (0-100% Full Scale)
  • Adjustable Time Delay (0-60 Seconds)
  • Locking Adjustments
  • 4 Pin Eurofast Connector
  • IP67 Rated

Typical Applications
Building Services, Pulp and Paper, Mining, Metals, Utilities, Automotive, Water, Pharmaceutical

CMCP423VTA 

CMCP423VTA Manual

Buy CMCP423VTA Compact Vibration Switch

Specifications:

Technical Performance  
Velocity Ranges: -01 Model: 0-1.0 In/Sec RMS (0-25.4mm/Sec.)
-02 Model: 0-2.0 In/Sec RMS (0-50.8mm/Sec.)
Frequency Response:  10 Hz to 1 kHz ± 5% - ISO 10816
Isolation:    Base Isolated
Transverse Sensitivity:  Less than 5%
Electrical  
Output Current:  4-20mA DC Proportional to Range in RMS Velocity
Supply Voltage:   15 to 32 VDC
Switching Output:   Normally Energized 24VDC Output (Opens on Alarm)
Output Impedance:  Loop Resistance 600 Ohms Max @ 24VDC
Sensor OK Indication:  Green LED
Alarm Indication:    Yellow LED
Current Consumption:  50mA
Environmental  
Operating Temperature Range: -25 to 80⁰C (-13 to 176⁰F)
Sealing:   IP67
Maximum Shock:  100 g
EMC:    EN61326-1:2013
Reverse Polarity:  Protected
MTBF:    510 Years
Mechanical  
Case Material:    Stainless Steel 316L / Plastic
Mounting Torque:  11.1 Ft-lbs
Weight:  4.1 Oz (116g)
Mounting:   M8x1.25 and Optional ¼”-28 UNF Thread Adapter
Mating Connector: 4 Pin Eurostyle
 

Sensor Ordering Information:

CMCP423VTA –XX Description
  -01 1.00 In/Sec Full Scale (25.4mm/Sec)
  -02 2.00 In/Sec Full Scale (50.8mm/Sec)

Cable Ordering Information:

CMCP604M –XX -XXX Description
  -01   Straight M12 4 Pin Shielded Cable, TPE Jacket, -50 to +80 Deg. C Range
  -02   Side Exit M12 4 Pin Shielded Cable, TPE Jacket, -50 to +80 Deg. C Range
    -16 16’ Cable
    -32 32’ Cable
    -64 64’ Cable
    -XXX Specify Cable Length

 

 

Copyright © 2014 STI Vibration Monitoring Inc. All Rights Reserved.