|
Products
|
  
|
CMCP400 Series Instrument Wire |
 |
Instrument
wire is provided by
STI Vibration Monitoring Inc. as a service
to our customers. These wires are used in various field wiring installation applications
for permanent vibration monitoring systems. All instrument cables have been carefully
reviewed and selected to insure that they meet the proper industry specifications and
STI applications requirements. The most common types are available from
STI stock. Large orders and those cables with lower usage will be dropped shipped
directly to the customer from our distributor. |
High Temperature Bare Copper Pair Instrument
Wire:
Recommended for Paper Machine Applications CMCP400-XXXX is a 392° F (200° C) high temperature Teflon jacketed and insulated, 20 AWG
bare copper wire, twisted pair instrument cable, with an overall braided shield. For the
multiconductor cables, each pair is color coded, individually shielded, and provided with
a rip cord for jacket removal. |
| CMCP400 |
High Temp. Bare Copper Pair Instrument Wire |
| |
Only
Available in 1,000 Foot Rolls +/- 10% |
Standard Instrument Cable:
Standard instrument cable is 221° F
(105° C) temperature rated, PVC insulated and jacketed, twisted
bare copper wire, and 100% coverage foil shielded with drain wire. These
standard instrument cables are designed to be installed in conduit or
wire-ways with a sunlight resistant outer jacket. Long installation lengths
over 250 feet (63.5 m) should use 18 AWG wire to reduce frequency
attenuation. Twisted Shielded Pair cable can be used for recorder outputs,
2-wire accelerometers, relay output connections, and some system
connections. Twisted shielded triad cables are used for all proximity
transducer systems, 3-wire accelerometers with temperature measurement, and
RTD temperature sensors. |
|
CMCP410
|
-XX
|
-XXXX
|
20 AWG Pair
|
| |
-01 |
|
1-Pair (0.210" Dia.) |
| |
-02 |
|
2-Pairs (0.370" Dia.) |
| |
-04 |
|
4-Pairs (0.420" Dia.) |
| |
-08 |
|
8-Pairs (0.510" Dia.) |
| |
-12 |
|
12-Pairs (0.630" Dia.) |
| |
-16 |
|
16-Pairs (0.700" Dia.) |
| |
-24 |
|
24-Pairs (0.850" Dia.) |
| |
|
-XXXX |
Length in Feet (2,500 ft max per roll) |
| CMCP415 |
-XX |
-XXXX |
18 AWG Pair |
| |
-01 |
|
1-Pair (0.230" Dia.) |
| |
-02 |
|
2-Pair (0.430" Dia.) |
| |
-04 |
|
4-Pair (0.470" Dia.) |
| |
-08 |
|
8-Pair (0.560" Dia.) |
| |
-12 |
|
12-Pair (0.700" Dia.) |
| |
-24 |
|
24-Pair (0.970" Dia.) |
| |
|
-XXXX |
Length in Feet (2,500 ft max per roll) |
|
CMCP420
|
-XX
|
-XXXX
|
20 AWG Triad
|
| |
-01 |
|
1
Triad (0.220" Dia.) |
| |
-04 |
|
4
Triad (0.480" Dia.) |
| |
-08 |
|
8
Triad (0.560" Dia.) |
| |
-12 |
|
12
Triad (0.700" Dia.) |
| |
|
-XXXX |
Length in Feet (2,500 ft max per roll) |
|
CMCP425
|
-XX
|
-XXXX
|
18 AWG Triad
|
| |
-01 |
|
1
Triad (0.240" Dia.) |
| |
-04 |
|
4
Triad (0.530" Dia.) |
| |
-08 |
|
8
Triad (0.650" Dia.) |
| |
|
-XXXX |
Length in Feet (2,500 ft max per roll) |
LAN
Interconnect Cable:
CMCP450 is 24 AWG Polyethylene insulated
wire, twisted pair, with both a 100% foil coverage and a 86% coverage tinned
braid shielded cable. The nominal capacitance of this cable is 15.5 pF/ft
(100 Ohm). |
|
CMCP450
|
-XXXX
|
LAN Interconnect
Cable0.33" OD (0.84 cm)
|
| |
-XXXX |
Length in Feet (2,500 ft max per roll) |
|
|
