|
Products
|
  
|
CMCP1100HT High Temperature
Industrial
Accelerometer |
 |
Features:
- Low Cost
- High
Temperature Rating - 120°C,
250°F
- Small Size Case, 1/2" x 1.05"
- Small Footprint, 1/2"
- Integral Cable (5, 10 or 20 Meters)
- 100 mV/g Sensitivity
- 0.32 Hz to 10 KHz Frequency Range (±3 dB)
- Waterproof
|
The CMCP1100HT accelerometer is manufactured in house to high
quality standards. Each accelerometer is fully enclosed in a potted and waterproof
stainless steel case. CMCP1100HT
accelerometers, in the three standard length cables, are always in stock ready for
quick delivery. Other cable lengths and side exit models are custom made to fit
your exact specifications.
Application Note: Accelerometer Installation Guide |
 
Specifications:
| Dynamic Performance |
English |
SI |
| Sensitivity (±10%) |
100 mV/g |
10.2 mV/(ms-2) |
| Measurement Range |
±50 g |
±500 ms-2 |
| Frequency Range: (±3 dB) |
0.32 to 10 kHz |
0.32 to 10 kHz |
| Mounted Resonant Frequency |
>25 kHz |
>25 kHz |
| Amplitude Linearity |
≤1% |
≤1% |
| Transverse Sensitivity |
≤5% |
≤5% |
| Environmental |
English |
SI |
| Shock Limit |
±7,000 g pk |
±70000 ms-2 pk |
| Temperature Range |
-65 to +185° F |
-54 to 85° C |
 |
| Electrical |
English |
SI |
| Settling Time |
2.5 sec |
2.5 sec |
| Excitation Voltage |
18 to 28 VDC |
18 to 28 VDC |
| Excitation Constant Current |
2 to 20 mA |
2 to 20 mA |
| Output Impedance |
<100 ohms |
<100 ohms |
| Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
| Electrical Case Isolation |
>108 ohms |
>108 ohms |
| Electrical Protection |
RFI/ESD |
RFI/ESD |
| Integral Cable |
22 AWG , 221° F |
22 AWG, 105° C |
| Spectral
Noise |
|
|
| (1 Hz) |
85 µg
/ √Hz |
850 (µm/s-2)
/ √Hz |
| (10 Hz) |
10 µg
/ √Hz |
100 (µm/s-2)
/ √Hz |
| (100 Hz) |
2.7 µg
/ √Hz |
27 (µm/s-2)
/ √Hz |
| (1 kHz) |
1 µg / √Hz |
10 (µm/s-2)
/ √Hz |
| Mechanical |
English |
SI |
| Size |
0.50" x 1.37" |
12.7 x 34.8 mm |
| Weight (including 5 M cable) |
2.5 oz |
70.7 g |
| Mounting Thread |
1/4-28 UNF-2B |
1/4-28 UNF-2B |
| Mounting Torque |
2 to 5 ft-lb |
2.7 to 6.8 N-m |
| Sensing Element |
Ceramic/Shear |
Ceramic/Shear |
| Case Material |
Stainless Steel |
Stainless Steel |
| Sealing |
Potted |
Potted |
| Wrench Flats |
7/16 |
7/16 |
Ordering Information:
CMCP1100 100mV/g Series with Integral Cables
| CMCP |
1100XX |
|
|
Specify Sensor Type: |
1100
1100HT |
1100S
|
|
| |
1100 |
|
|
Standard Accelerometer, Integral Cable |
| |
1100S |
|
|
Side Exit Accelerometer, Integral Cable |
| |
1100HT |
|
|
High Temperature Accelerometer, Integral Cable |
| |
|
-XX |
|
Specify Integral Cable Length: |
| |
|
-05 |
|
5 Meter Cable |
| |
|
-10 |
|
10 Meter Cable |
| |
|
-20 |
|
20 Meter Cable |
| |
|
|
-XX |
Specify Instrument End Cable Connection: |
| |
|
|
-00 |
Blunt Cut (Bare) |
| |
|
|
-01 |
Female BNC Connector |
| |
|
|
Note: CMCP1100 Series Accelerometers are 100mV/g ICP Type |
Sample:
Part Number: CMCP1100HT-20-00
Description: High Temperature Accelerometer with 20 Meter Integral Cable, Blunt Cut on Instrument End for Terminal Connections |
|
|
